眾所周知，注塑加工模具存在條紋缺陷是一件非常嚴重的事情，會直接影響注塑加工的精度，嚴重導致注塑加工模具報廢，所以要引起重視。那么，濟南注塑加工時芯片如何避免出現條紋缺陷？

　　As we all know, the existence of fringe defects in injection molding moulds is a very serious thing, which will directly affect the accuracy of injection molding and seriously lead to the scrapping of injection molding moulds, so attention should be paid to it. So, ji 'nan injection molding chip how to avoid the appearance of stripe defects?

　　正確設計濟南注塑加工模具，精心加工，合理修模，及時氮化是防止條紋缺陷的關鍵措施。濟南注塑加工模具應嚴格按照圖紙要求加工進行，特別注意改善分流孔的表面光度和模橋的滴狀，改善固態金屬的流動狀態，減少摩擦熱；擠壓帶有紋理條紋的注塑模具時，修模人員應現場了解注塑模具的出料情況，確定正確的修模方案。

　　Correct design of Ji 'nan injection molding mold, careful processing, reasonable mold repair, timely nitriding is the key measure to prevent stripe defects. Ji 'nan injection molding mold should be processed strictly in accordance with the requirements of the drawings, pay special attention to improve the surface luminosity of the shunt hole and the drop shape of the die bridge, improve the flow state of solid metal, reduce friction heat; When extruding injection moulds with grain stripes, repair personnel should know the discharge situation of injection moulds on site and determine the correct repair scheme.

　　對于修模者來說，觀察型材出料的瞬時狀態比觀察型材出料頭來確定修模方案要好得多。注塑模具應按規定及時氮化，保證固態金屬合理的流動狀態。

　　For mold repairers, it is much better to observe the instantaneous state of the profile than to observe the profile head to determine the mold repair plan. The injection mould should be nitrified in time according to the regulations to ensure the reasonable flow state of solid metal.

　　設計注塑加工模具，合理布置分流孔，合理確定工作帶長度及其長度變化的過渡，模橋的滴水形狀，合理的焊接角度，使焊接點落在焊室平面上，在保證模芯剛性和強度的同時，加深焊室深度或擴大焊室截面積，必要時采用“沉橋”是防止條紋缺陷的基本措施。

　　Design of injection moulds, reasonable decorate tap hole, the reasonable work zone length and the length of the transition change, dripping shape mould bridge, the reasonable welding Angle, make the welding point fall in the welding room plane, in the mold core rigidity and strength at the same time, the deepening of or expand welding welding chamber room area, using "sunken bridge" when necessary basic measures is to prevent the stripe defect.

　　對注塑加工質量進行判別要這么看：直接看注塑加工產品的象征，不一樣的制造資料其性是不一樣的，所以濟南注塑加工廠通常都會在商品上標明運用的是哪種資料；直接聞氣味，關于一些不健康的資料會存在一些對比難聞的刺激性的氣味，這種注塑加工產品是千萬不能采購的，尤其是平時使用的商品。

　　To distinguish the quality of injection molding processing to look like this: directly look at the symbol of injection molding processing products, the safety of different manufacturing materials is not the same, so Ji 'nan injection processing factory will usually indicate the use of what kind of information on the goods; Smell directly, there will be some contrast smelly irritating smell about some unhealthy information, this injection processing products is not to purchase, especially the usual use of goods.

　　我們在進行注塑加工的時候，往往會因為一些小的原因出現一些不必要的缺陷，會給我們的注塑加工造成一些麻煩。所以需要多加小心才是，那么更多內容就來此snksk.com咨詢吧。

　　When we are in injection molding processing, there are often some unnecessary defects for some small reasons, which will cause some trouble for our injection molding processing. So need to be more careful is, so more content to this snksk.com consultation.